ROTARY CUTTING RULE for DIES
(CONVERTING INDUSTRIES) 

CUTTING RULE

type DST - straight without notch

type DCT - straight with notch

type BENT - bent to XX diameter

Quality:
HF (TopHard)
               Temperedand annealed carbon steel  C50.
               Universal use.
               Body Hardness 37/38 HRC.
               Cutting hardness 52/54 HRC 
               Bendability : 120°.

Types:
DST : Straight
DCT-P : Notched (parallel noched default) 
DCT-PN : Narrow Notched  ( to be bent with diameter  <  200 mm)
DCT-C : Tapered notched 
CURVOxxx : Bent Diameter mm xxx 

Teeth:
12TPI : 12 teeth per inch  (Pitch P= 2.25 mm)
25TPI : 25 teeh per inch  (Pitch P=1.00 mm)
8TPI :    8 teeth per inch (Pitch P=3.00 mm)
Other teeth types on request (see industrial blades)

Notch:
Parallel notch  :            TP = 4.5 mm  DP = 6.5 mm  HP = 13 mm 
Narrow parallel notch :  TP = 4.5 mm  DP = 4.5 mm   HP = 13 mm 
Tapered notch :            TC = 5.5 mm  DC = 7.5 mm   AC° = 10°    HC = 13 mm

Bending:
Internal bending diameter  D:  from mm 150  to  mm 645

Packing: roll 50 m 
Please specify Clockwise or Anticlockwise rolling way :  SX or DX.

CREASING RULE

Shape:

Height and thickness:

Quality :  
HARD
           Tempered and annealed carbon steel  C67
           Universal use
           Body hardness 42/44 HRC

Types:
DST : Straight
DCT-P : Notched (parallel noched default) 
DCT-PN : Narrow Notched  ( to be bent with diameter  <  200 mm)
DCT-C : Tapered notched 
CURVOxxx : Bent Diameter mm xxx 

Packing: roll 50 m 
Please specify Clockwise or Anticlockwise rolling way :  SX or DX.

PERFO and CUT CREASE COMBO

Height:
Standard cutting heights  mm:  H = 23.8 / 24.4 / 24.6 / 25.1 / 25.4 / 26.1 / 30.1
                                                       C = H - 5 mm    ( for perforation rule)
                                                       C = upon request     ( for cut-crease combination) 
Thickness:
Standard thickness mm:  S = 1.42  

Pitch:
Standard pitches P x S (mm)  = 3 x 3 / 4 x 4 / 5 x 5 / 6.5 x 6.5 / 8 x 8 / 10 x 10 / 15 x 15

Other pitches upon request  ( S  = 3 / 4 / 5 / 6.5 / 8 / 10 / 15 )    P+S <= 40 mm

Quality:
HF (TopHard)  
           Temperedand annealed carbon steel  C50.
           Universal use.
           Body Hardness 37/38 HRC
           Cutting hardness 52/54 HRC 
           Bendability : 120°

Types:
DST : Straight
DCT-P : Notched (parallel noched default) 
DCT-PN : Narrow Notched  ( to be bent with diameter  <  200 mm)
DCT-C : Tapered notched 
CURVOxxx : Bent Diameter mm xxx
 

Packing: roll 50 m 
Please specify Clockwise or Anticlockwise rolling way :  SX or DX.

© 2001 Cutting System Srl - All rights reserved.